
Disc Micron Grinder
Disk-type MicronGrinding Machine, is a wet grinding equipment that can grind materials to micron level, efficient double cooling system and micro-gap centrifugal separation system, so that the material will not be blocked by the separator to form a poor material, filter use cycle is greatly extended, the filter can also be removed alone cleaning or replacement.
Mainly used in water-based coatings, pigments, dyes, color pulp, water-based inks, pharmaceuticals, cosmetics, photosensitive materials, electronic slurry and other industries of high-efficiency wet grinding.
Product Features
1, suitable for large quantities, continuous production
3, high wear-resistant cavity to add a life together on the material does not form pollution
4, the choice of fence type dynamic separator or static screen, greatly improve the filtration area, to ensure the fluency of the material
5, the whole machine manufacturing precision, high-power model noise is low, and no obvious vibration
6, according to customer requirements, choose Pu, ceramics, alloy steel materials.
7, optional frequency conversion speed Regulation, PLC control system.
Model (Mode & Spec.) | Motor (Power for Press) KW | Grinding cylinder Volume (Volume) L | Processing batch (Yield) L | Grinding Media (zirconia beads) mm | Dimensions (Dimensions) mm |
TPD-10 | 18.5 | 10 | 40-200 | 0.3-3.0 | 1700*900*1200 |
TPD-30 | 22-30 | 30 | 80-400 | 0.3-3.0 | 1800*1000*1200 |
TPD-50 | 37-45 | 50 | 100-600 | 0.3-3.0 | 2000*1100*1300 |
TPD-100 | 55 | 100 | 200-1200 | 0.3-3.0 | 2300*1100*1500 |
TPJ-6 | 15 | 6 | 40-100 | 0.1-3.0 | 1100*800*1000 |
TPJ-10 | 18.5 | 10 | 80-200 | 0.1-3.0 | 1300*900*1200 |
TPJ-30 | 22/30 | 30 | 100-500 | 0.1-3.0 | 1600*1000*1200 |
TPJ-60 | 37/45 | 60 | 200-800 | 0.1-3.0 | 2000*1100*1300 |
TPJ-100 | 55/75 | 100 | 300-1200 | 0.1-3.0 | 2300*1100*1500 |